SH-5208-HD Hydraulic Plate Shear
 |
Lease to own for $ per month! |  |
Shearing Position Indicator Light
| Specifications | |
| Max. Shear Length | 51.96” |
| Max Material Thickness - Mid Steel | .177” |
| Max Material Thickness - Stainless Steel | .137” |
| Strokes / Minute | 30 – 42 s.p.m. |
| Hold Down Qty. | 8 |
| Hold Down Pressure |
3.58 ton
|
| Front Gauge Length | 39.37” |
| Back Gauge Length | 23.62” (manual) |
| Blade Rake Angle | ½ - 2 deg (hydraulic) |
| Motor | 10 hp |
| Power Requirement | 220 volt / 3 phase / 60 hertz |
| Oil Capacity | 25 gal |
| Shipping Dimensions (L/W/H) |
90.55” / 47.24” / 62.99”
|
| Shipping Weight | 4400 lbs |
This hydraulic shears capable of cutting 11/64" mild steel across its useful width of 52". A heavy electro welded frame made of thick plate steel coupled with a 3 axis bearing to hardened ground track system allows this machine to cut at capacity smoothly.
Like all Baileigh heavy duty hydraulic shears, the blades have multiple edges for longer life. The in feed table has roller bearings to assist with heavier pieces of sheet metal. There is a blade gap adjustment that changes the gap in seconds for varying thickness The blade rake can be changed in seconds to eliminate or reduce curling or twisting to the material being cut.
This hydraulic shears operation can be controlled by a well laid out operator panel with foot pedals controls. This plate shear can be run in the jog, single cycle, or continuous cycle mode. There is a manual back gauge with numerical scale.
Baileigh Industrial hydraulic shears will offer decades of production to the metal fabricator. Please take a moment to check out rest of our quality metal fabricating products.