How do the various horizontal press brake models differ?
Basically in the power in Tons. It is therefore necessary to know the type of material, thickness, and dimensions of the piece to be folded in order to determine the type of horizontal bending press most suited to the type of processing.

Does the maximum horizontal press brake stroke differ according to model?
Certainly. The maximum stroke of the mobile punch is 8" in the smallest model, going up to 13" in the larger models.

Is it necessary to carry out the calibration of the hydraulic pressure upon first installing horizontal press brakes?
Absolutely not. All horizontal press brakes are properly calibrated during testing by authorized personnel. No adjustments should be carried out on the machines unless previously authorized by the company.

Is the horizontal bending press supplied with hydraulic oil? If not, does the quantity of oil vary according to model and which brand is most suitable?
The presses are supplied with hydraulic oil only if this is specified at the time of ordering. The quantity of oil varies in accordance to machine power and any brand is suitable as long as it conforms with the class indicated in the Oil Table in the instruction manual.

What is the horizontal press brake input voltage?
All machines have been designed to function with a voltage of 240 volts and a frequency of 60 Hz. A maximum tolerance of +/- 10% is permitted; a voltage above or below that tolerated could damage the most sensitive machine parts and therefore it is advisable to check.

What equipment is necessary to carry out very tight "U" folds?
As opposed to the normal folds, which require the die- and punch-holder supports plus the die and the punch, the punch-holder support is not required for "U" folds as the U punch functions as the pivot.

What types of press bending can be carried out with the "U"punch?
The word is self-explanatory; this punch can bend pieces for camber, as well as creating very tight U-bends and boxes which would be impossible for a standard punch due to dimensions of the punch-holder support.

How do Ijudge which die to use for the press bending of a flat bar?
It's straightforward, the height of the material allows me to determine the height of the die, which the thickness multiplied by 8 allows me to determine the slot size. For example to fold a flat bar which is 4-3/4" high and 25/64" thick Iwould use a die which is 4-3/4" high.

What is the press bending capacity of the rotary tube bender and the beam pipe bender?
The maximum bending angle is 180° for the rotary tube bender and 90° for the beam pipe bender.

What is the maximum punching capacity of the punching tool?
The maximum thickness is 25/64" but can vary according to the type of material and the dimensions of the hole.

What is the maximum press bending capacity of the 4-slot die and the slot dimensions?
The maximum thickness is 5/32" and the slot dimensions are 5/8", 55/64", 1-3/8", and 2".