Home > Benders > Rotary Draw Benders > IDX Positioning Tables

IDX Positioning Tables

Tube benders equipped with our tubing bender positioning table are easier to use producing more repeatable bends. RMD tubing benders are American Made.

Tubing Bender Positioning Table - Model IDX-10

RMD electric programmable tubing benders can be equipped with the optional tubing bender positioning table. A tubing bender fitted with a rotary positioning table allows for accurate bends in varying planes, as well as consistent measurements between bends.
RMD tube benders that can be fitted with the table are the models 250, 300, and the 350 The positioning table can be attached or taken off of the tubing bender with ease.
The IDX-10 comes standard with a 10 foot table. We do offer an IDX-15 which is 15 feet long and the IDX-20 which is 20 feet long.
The positioning carriage rolls on a precision V block rail and rides the rail using V-block bearings.
The positioning carriage has a heavy duty lubricated gear box that is used to turn the position of the completed bend to the desired varying plane. To change the plane of bend, the operator simply turns a hand wheel and stops at the plane of bend angle (large 360 degree angle dial).
The table comes with an 8" three jaw chuck with 2-1/2" thru hole that allows for longer pieces of tubing than the table length. Chuck can handle up to 4-1/2" OD. The minimum OD is 1/4".
The table has a linear indicator strip so the operator can set up accurate distances between bends. Mechanical stops can be positioned for the start of each bend. Using the mechanical stops is very beneficial for repeatability on bigger production runs.
RMD tubing benders equipped with the tube benders positioning table is great for hand railing, auto chassis, furniture, marine products, playground equipment, and hundreds of additional applications.
Like a RMD tubing bender, the positioning table is made in America!

Click below to download Acrobat Reader

Specifications subject to change without notice.