RDB-300 Tube and Pipe Bender

Lease to own for $ per month!

(Click Picture to Enlarge)

Model 300-PRG Shown

Click Here to See the RDB 300 S Standard Control

(Click Play above to view a video about our Model 300 Rotary Draw Bender.)
(Please note this machine has had design enhancements since the filming of this video.)

Specifications and Capacities: RDB-300
Mild Steel Pipe (Schedule 40)	2"
Aluminum Pipe (Schedule 40)	2.5"
Stainless Steel Pipe (Schedule 40)	1.5"
Mild Steel Round Tube (Wall)	3" (.095)
Aluminum Round Tube (Wall)	2.5" (.156)
Stainless Steel Round Tube (Wall)	2.375" (.164)
Chromolly Round Tube (Wall)	2" (.125)
Mild Steel Solid Rod	1.25"
Mild Steel Square Tube (Wall)	2" (.125)
Minimum OD	.25"
Maximum Speed to 180 Degrees	16 Seconds
Maximum Center Line Radius (CLR)	15"
Minimum CLR	.5"
Power Requirements	***220V (1- or 3-Phase)
Weight (Lbs.)	710
Length	50"
Width	28"
Height	42"

** High Speed Model / Standard Model; *** Other Voltages available by special order

Model 300-S Rotary Draw Tubing Bender

Programmable electric tubing bender
Maximum capacity is 2" Schedule 40 pipe, 2.5" tube
Like most RMD tubing benders, the model 300 utilizes a portable cart with wheels for easy mobilization around the job site or production floor.
To program a bend, simply turn the degree hand wheel to the desired bend angle (include spring back). When performing a bend, the die head will automatically stop at the degree indicated on the numerical counter. Allows for accurate repeatability when performing one or multiple bends.
Optional OCS (operator control station) programming unit can store multiple programs. Each program can store 10 different bend angles. The model 300-S with OCS was designed to be understood easily for ease of operation.
Like all RMD tubing benders, bends can be advanced after stopping machine, saving on material costs during set-up.
Non-proprietary center die spindle allows for custom tooling applications.
This tubing bender is supplied with an AC variable speed motor drive with built in speed potentiometer.
Bend material: Round or square tubing, pipe, or solid rod.
Similar to other RMD programmable tube benders, the model 300 can be fitted with a rotary positioning table allowing for accurate bends in varying planes, as well as consistent measurements between bends.
Extra heavy duty design normally seen on larger models, means more value for the investment.
The Model 300-S tubing bender utilizes a portable cart with wheels for easy mobilization around the job site or production floor.
Components are off the shelf.
Fabricated components are CNC machined for high quality.
Lead screw indicator ensures repeatable counter die positioning for multiple bends.
Bend can be advanced after stopping machine, saves on material costs.
In the return mode, the die head stops in the zero or home position.
All die sets are color coded for easy identification (green for pipe, blue for tube, and gray for square.)
Counter dies have replaceable insert that reduces future replacement costs.
Unique die design allows for die and hook arm to be disassembled, reducing future replacement costs.
Overload protection ensures long component life.
Electrically driven means no complex hydraulics.
Non-proprietary center die spindle allows for custom tooling applications.
RMD pipe benders are made in USA!

OPTIONS:

Power: Three phase available
3 phase upgrade
Programmable feature and foot pedal controls
Micro processor controls in place of dialing in bend angles
Rotary positioning table available in various table lengths for repeatable bends in a single piece of material. Allows for accurate bends in varying planes, as well as consistent measurements between bends.

Click below to download Acrobat Reader

Specifications subject to change without notice.